Skip to content
Freestanding steel double garage with two roller doors beside a concrete driveway on a Queensland acreage block

Steel garages for Brisbane blocks

BWG Sheds supplies steel garages for Brisbane homes, as DIY kits or supply-and-install. A garage over 10 m² needs building approval from a certifier; on lots under 450 m² Brisbane's small-lot code sets the siting, and character areas can trigger an amenity and aesthetics referral to Council.

Garages · Brisbane

Garages · Brisbane
ConfigurationsSingle, double, extra-height and multi-bay
DoorsRoller doors sized to your vehicles
ExtrasPersonal access door, windows, workshop bay
CouncilBrisbane City Council

What matters for a garage in Brisbane

Brisbane is one of the few councils where the siting rules themselves change with lot size. On lots under 450 m² the Dwelling house (small lot) code in City Plan prevails over the Queensland Development Code, and if a garage cannot meet the standard setbacks, the certifier can lodge a referral asking Council for alternative provisions.

In the Traditional building character overlay and neighbourhood plan areas, Brisbane can refer Class 10 work for amenity and aesthetics assessment. A steel garage beside a Queenslander can pass easily when its roof pitch, colours and position are chosen with that in mind.

Flood levels are property-specific in Brisbane: Council's FloodWise Property Report gives the flood levels we use to set the garage slab.

Requirements depend on your property, proposed structure and local planning/building controls.

Garages: the brochure

  • Cars and 4WDs. Width for doors to open, length for a bench or storage at the back.
  • Caravans and boats. Extra-height bays with the door opening sized to the van or the boat on its trailer.
  • Garage plus workshop. A parking bay beside a workshop bay, with power, light and a personal access door.

Approval in Brisbane

In Queensland a shed avoids building approval only if it is 10 m² or less in plan area, no more than 2.4 m high (mean 2.1 m) with no side over 5 m, and not in Wind Region C. A garage almost always needs building approval, and a garage close to a boundary has to meet the siting rules or go to council for a referral.

Brisbane City Council building information

Design it in 3D.Build your garage in our online designer and send it to us: we'll price that exact design and give you a timeframe.

Try our 3D shed designer now(opens in a new tab)

Garages in Brisbane: questions

Can I build a steel garage in a Brisbane character area?

Usually yes, but it may be referred to Council for amenity and aesthetics. Choosing the roof pitch, colours and position to suit the house makes that straightforward.

My Brisbane lot is under 450 m². Which rules apply?

Brisbane City Plan's Dwelling house (small lot) code, which prevails over the Queensland Development Code on small lots. We design the garage to it.

Quote a garage in Brisbane.

Five short steps: the site, the type of shed, a rough size, your timing and how to reach you. Or pick up the phone.

Call

07 5466 5858

Monday to Friday, 8 am to 5 pm

Call 07 5466 5858

Request a shed quote

Step 1 of 5

Where is the shed going?

Rather talk it through? Call 07 5466 5858

CallGet a quote