Skip to content
Freestanding steel double garage with two roller doors beside a concrete driveway on a Queensland acreage block

Steel sheds across Brisbane, Ipswich, Logan & Redlands

Yes. BWG Sheds services Brisbane, Ipswich, Logan (including Beenleigh and Jimboomba) and Redland Bay for garages, backyard and residential sheds, workshops, carports and DIY steel shed kits, with the siting, overlay and approval work that suburban blocks need.

Get a quoteCall 07 5466 5858

Brisbane

Brisbane
CouncilsBrisbane City Council, Ipswich City Council, Logan City Council, Redland City Council
Towns5 serviced
Common projectsGarages, Residential sheds, Workshop sheds
ServicesDesign, approval help, kits, supply & install

Garages, backyard sheds and workshops for Brisbane, Ipswich, Logan and Redland Bay, where the block is smaller and the neighbours are closer.

How Brisbane shapes a shed project

On a suburban lot the questions are siting and neighbours. Brisbane's City Plan has its own small-lot code that prevails over the Queensland Development Code on lots under 450 m², and a certifier can ask Council for alternative provisions such as a reduced boundary setback through a referral. In rural, residential and character areas, Brisbane can also apply an amenity and aesthetics referral to Class 10 buildings.

Each council runs approvals differently. Logan and Redland do not certify building work at all; a private certifier does. Ipswich will certify, and its rules catch a detail people miss: a shed attached to another building or structure needs building approval even when it is small.

Flood mapping is published property by property. Brisbane's FloodWise report, Ipswich's OV12 flood risk and overland flow overlay and Logan's updated risk-based flood mapping all inform where a garage or shed can sit and how high the slab should be.

Redland Bay sits on Moreton Bay, which BlueScope classes as 'exposed' salt water. For garages close to the water the cladding and fastener choice should match that exposure.

Shed approvals in Brisbane

Council rules differ, so these notes are per council and come from each council's own pages. Requirements depend on your property, proposed structure and local planning/building controls.

Brisbane City Council

  • Brisbane City Council says sheds are generally accepted development (no planning approval), subject to requirements where the property is in a residential zone. Source
  • In Brisbane, a building certifier can seek alternative provisions such as a reduced boundary setback by lodging a referral request with Council. Source
  • Brisbane City Plan's Dwelling house (small lot) code prevails over the Queensland Development Code on lots under 450 m². Source
  • Brisbane's amenity and aesthetics referral can apply to Class 10 building work in rural, rural residential, environmental management and residential zones, the Traditional building character overlay and neighbourhood plan areas. Source
  • Brisbane City Council's FloodWise Property Report gives flood levels for an individual property. Source

Council building page Planning scheme

Ipswich City Council

  • Ipswich City Council requires building approval where a shed's plan area is over 10 m², it is over 2.4 m high or 2.1 m mean height, any side is over 5 m, or it is attached to another building or structure. Source
  • Building approvals in Ipswich can come from Council's Building Certification team or a private certifier. Source
  • Ipswich City Plan 2025 maps flood risk in overlay OV12 'Flood Risk and Overland Flow' using five development-related flood risk categories. Source

Council building page

Logan City Council

  • Logan City Council does not provide building certification; building approval must come from a private building certifier. Source
  • Council says that in most instances dwelling houses and associated structures such as carports and sheds do not need Council approval because they are accepted development under the Logan Planning Scheme 2015. Source
  • Council's standard conditions include flood-level conditions for domestic outbuildings and a condition for a shed on a site with no existing house. Source
  • Updated risk-based flood mapping and policy (Temporary Local Planning Instrument No. 1/2024) took effect in Logan on 6 March 2025. Source

Council building page Planning scheme

Redland City Council

  • Under Redland City Plan, a shed associated with a house on the same property is a 'domestic outbuilding'. Source
  • Planning approval is generally not needed where a house already exists, but can be triggered by an overlay such as coastal protection (erosion prone), heritage or flood and storm tide. Source
  • A shed on vacant land (no house) may be an 'undefined use' or 'warehouse', which in a residential zone is impact assessable and generally not preferred. Source
  • Redland City Council no longer assesses building applications; private certifiers do. Source

Council building page

Wind: Geoscience Australia's interpretation of the AS/NZS 1170.2:2021 wind-region map places Brisbane, Ipswich, Logan and Redland Bay in Region B1 (non-cyclonic). The dataset is indicative only; the engineer confirms the site's design wind speed. Source

Talk to BWG Sheds about your site

Towns we service in Brisbane

Popular in Brisbane

  • Garages

    Measure what you're parking, then add the room to open doors, walk around and store things. That, not a catalogue size, sets the garage.

  • Residential sheds

    Backyard sheds live close to fences, neighbours' windows and the house, so siting rules matter as much as size.

  • Workshop sheds

    Plan the working floor first: where the bench goes, where the vehicle or machine sits, and how you'll move around it.

  • Carports

    Carports sit where people see them, often right on the boundary or against the house, so siting and wind are the first questions.

  • Commercial sheds

    A commercial shed has to work for the business every day: vehicle access, loading, a clean customer entry, and a layout that doesn't need changing in two years.

Brisbane: local questions

Can I build a garage on the boundary in Brisbane?

Sometimes. Under the Queensland Development Code a Class 10a building can sit within the side or rear clearance if it meets height and length limits, and on small lots Brisbane's own code applies instead. If your design falls outside those rules, the certifier can seek a referral from Council. We check this before drawings are finalised.

Does Logan City Council approve sheds?

Logan does not provide building certification; a private certifier issues the building approval. Council says most sheds associated with a house are accepted development under its planning scheme, but flood conditions and a shed on a lot with no house can change that.

Can I put a shed on a vacant block in Redland Bay?

Be careful. Redland City Council says a shed without a house may be an 'undefined use' or 'warehouse', which in a residential zone is impact assessable and generally not preferred. Talk to us before you order anything.

Local guides

Quote a shed in Brisbane.

Five short steps: the site, the type of shed, a rough size, your timing and how to reach you. Or pick up the phone.

Call

07 5466 5858

Monday to Friday, 8 am to 5 pm

Call 07 5466 5858

Request a shed quote

Step 1 of 5

Where is the shed going?

Rather talk it through? Call 07 5466 5858

CallGet a quote